Welcome to the best place for custom and one of a kind vinyl graphics.

Ram Print is here to see that you get exactly what you are looking for with the best quality material available.We only use the best vinyl on the market!

If you are just looking to add to what you already have, we can help. Send in a digital or mail us a standard image of the vehicle we are working on. We will also need some type of reference measurement for scaling.



Why Use Vinyl over paint?
First of all vinyl is cheaper and faster than painting. When you have a machine painted you can simply chose a base color and run all you graphics in vinyl. The benefit of this is 2 fold, you can change the design at any point, and repair in the even of pavement contact is simple.

What type of Vinyl Should you use?
Vinyl comes in many different varieties and qualities. Most high performance vinyl is good for 5 to 8 years in extreme outdoor conditions. Cheaper vinyl can also be had for 3 year adhesion and fade resistance. Use the vinyl that makes sense for your application.

What colors can you get?
All of them! Vinyl can come in everything from flat black to brushed aluminum and even some pearl and reflective colors.

Can I get more than one color per graphic?
Yes you can, you can get as many colors as needed. Imagine each color as a layer, then we just stack the layers to line up properly. But, be prepared, having multiple colors can sometimes do the same to the price.

Can you paint over vinyl?
Yes, but only the high performance is recommended for this. The high performance is resistant to most chemicals and is very durable for painting. We recommend you run a test panel with the paint and sample vinyl before committing.

How do you install the vinyl?
Vinyl is simple to install. First make sure you have a reference point for placement of the graphic. Use a wax and grease remover to clean the area very well for proper adhesion.

  1. Spray the area with a solution of water and dish soap, (about 4 drops of soap per cup of water).
  2. Peal the backing off the vinyl and give it a squirt or to for complete coverage of solution.
  3. Place the graphic on the location to be installed and gently slide around until you have it in the proper location.
  4. Run a squeegee over the vinyl to remove as much moisture as possible.
  5. Then let it sit for about 5 minuets.
  6. When you pull the tack sheet off make sure you use a very sharp angle, try to make the tack sheet parallel with the surface as you are pulling it off.
  7. Pull gently and slowly to reveal your new vinyl graphic.


Copying | Printing | Bindery & Finishing | Fine Invitations | Envelopes | Banners & Posters | Vinyl Graphics | Direct Mail | Graphic Design
Upload Files | FAQ's and Tutorials | Contact & Staff | Careers | Web Links
Home Page

All Graphics and HTML © 2010, Ram Print and Communication, LLC. All rights reserved.
All trademarks are owned by the respective companies or Ram Print and Communication, LLC.